The Disposable Endocutter Staplers have applications in abdominal, gynecologic and pediatric surgery for resection, transaction and creation of anastomosis.
There are 6 rows arc cross rank staples spread on the two sides of the scalpel, the staples are pushed and under the anvil guiding, the staples will be shaped up, meanwhile accomplish the tissue suturing and the scalpel cuts off the excess tissue.It will shorten the operation time and reduce the patients bleeding. When we developed and produced this product, we widely collected the information of domestic and abroad similar products, and we did serious research, analysis, comparison, and listened to the opinion and suggestion of medical research units and medicine clinical units, and then finalized this new product.It is a disposable product which reaches same level of international similar products and the price could be accepted by patients.
Features of Endocutter Stapler and Reloads
Brand new knife blade for each firing
Providing sharp and smooth cutting, lowering the risk of spread of tumor cells
Reinforced and fixed anvil
Improve the clamping force to ensure the consistent staple formation and effective staple length passing easily through gaps with the thin anvil to reduce the tissue damage when separating, easy to use.
Reinforced and integrated I-beam design
Enhance the parallel closing force, ensure the B-shape staple formation at the distal end of staple lines.
Real one-handed operation
Providing the control of jaws’ open and close in operation by one hand.
Articulating Reloads
Easy to use the articulating lever for manipulating the reload angle of 30 degree and 45 degree to left and right respectively.
Rotation Knob
With the rotation knob, the reload can rotate 360°.
High cost-effective
One stapler can be used with all kinds of reloads, which saves the cost a lot and reduces the complicated operation steps.
One stapler can be reloaded for 25 times on one single patient.
Advantages of Our Endocutter Stapler and Reloads
Full Range of Reloads
Total 22 kinds of reloads to meet delicate surgery demands.
Titanium Alloy made staples
The staples are made of 0.23mm Ti- 3Al- 2.5V, which has good material characteristics:
Tensile strength: 900+ (Mpa);
Yield Strength: 740+ (Mpa).
Anti-Slippery Design
Anti-Slippery deign on the green and blue, provides better holding force for clamping the thick tissue.
Application
Thoracic surgeries
Thoracoscope pulmonary bulla resection
Thoracoscope pulmonary wedge resection
Thoracoscope lobectomy of lung
Thoracoscope pneumonectomy
Gastrointestinal surgeries
Laparoscopic gastrectomy
Laparoscopic left/right half colon resection
Laparoscopic low anterior resection
Laparoscopic gastric bypass surgery
Specification
Code of Endocutter Stapler
Endocutter Stapler Standard Model | ZNQ-A |
|---|---|
Endocutter Stapler XL Model | ZNQ-C |
Code of Reloads
Reload article No. | Color Of Reload | Staple Height (mm) | Cutting Lenghth |
|---|---|---|---|
ZN-Z-30-2.0 | Grey | 2.0 | 30mm |
ZN-Z-30-2.5 | White | 2.5 | 30mm |
ZN-Z-45-2.0 | Grey | 2.0 | 45mm |
ZN-Z-45-2.5 | White | 2.5 | 45mm |
ZN-Z-45-3.5 | Blue | 3.5 | 45mm |
ZN-Z-45-4.0 | Gold | 4.0 | 45mm |
ZN-Z-45-4.8 | Green | 4.8 | 45mm |
ZN-Z-60-2.5 | White | 2.5 | 60mm |
ZN-Z-60-3.5 | Blue | 3.5 | 60mm |
ZN-Z-60-4.0 | Gold | 4.0 | 60mm |
ZN-Z-60-4.8 | Green | 4.8 | 60mm |
ZN-30-2.0 | Grey | 2.0 | 30mm |
ZN-30-2.5 | White | 2.5 | 30mm |
ZN-45-2.0 | Grey | 2.0 | 45mm |
ZN-45-2.5 | White | 2.5 | 45mm |
ZN-45-3.5 | Blue | 3.5 | 45mm |
ZN-45-4.0 | Gold | 4.0 | 45mm |
ZN-45-4.8 | Green | 4.8 | 45mm |
ZN-60-2.5 | White | 2.5 | 60mm |
ZN-60-3.5 | Blue | 3.5 | 60mm |
ZN-60-4.0 | Gold | 4.0 | 60mm |
ZN-60-4.8 | Green | 4.8 | 60mm |
Remark: "ZN-Z" means straight reloads; "ZN" means articulating reloads.
To contact us please use the following form to submit your enquiry, We will contact you as soon as possible.