Home > Stapling Devices > Disposable Endocutter -> Disposable Endocutter Stapler

Disposable Endocutter Disposable Endocutter Stapler 6680

The Disposable Endocutter Staplers have applications in abdominal, gynecologic and pediatric surgery for resection, transaction and creation of anastomosis

    There are 6 rows arc cross rank staples spread on the two sides of the scalpel, the staples are pushed and under the anvil guiding, the staples will be shaped up, meanwhile accomplish the tissue suturing and the scalpel cuts off the excess tissue.It will shorten the operation time and reduce the patients bleeding. When we developed and produced this product, we widely collected the information of domestic and abroad similar products, and we did serious research, analysis, comparison, and listened to the opinion and suggestion of medical research units and medicine clinical units, and then finalized this new product.It is a disposable product which reaches same level of international similar products and the price could be accepted by patients.    


 

Features of Endocutter Stapler and Reloads 

  Brand new knife blade for each firing
  Providing sharp and smooth cutting, lowering the risk of spread of tumor cells

  Reinforced and fixed anvil
  Improve the clamping force to ensure the consistent staple formation and effective staple length passing easily through gaps with the thin anvil to reduce the tissue damage when separating,  easy to use.

  Reinforced and integrated I-beam design
  Enhance the parallel closing force, ensure the B-shape staple formation at the distal end of staple lines.

  Real one-handed operation
  Providing the control of jaws’ open and close in operation by one hand.

  Articulating Reloads
  Easy to use the articulating lever for manipulating the reload angle of 30 degree and 45 degree to left and right respectively.

  Rotation Knob
  With the rotation knob, the reload can rotate 360°.

  High cost-effective
  One stapler can be used with all kinds of reloads, which saves the cost a lot and reduces the complicated operation steps.
  One stapler can be reloaded for 25 times on one single patient.

 

Advantages of Our Endocutter Stapler and Reloads 

  Full Range of Reloads
  Total 22 kinds of reloads to meet delicate surgery demands.

 

  Titanium Alloy made staples
  The staples are made of 0.23mm Ti- 3Al- 2.5V, which has good material characteristics:
  Tensile strength: 900+ (Mpa);
  Yield Strength: 740+ (Mpa).

 

 

  Anti-Slippery Design
  Anti-Slippery deign on the green and blue, provides better holding force for clamping the thick tissue.

 
Application

  Thoracic surgeries
  Thoracoscope pulmonary bulla resection
  Thoracoscope pulmonary wedge resection
  Thoracoscope lobectomy of lung
  Thoracoscope pneumonectomy

  Gastrointestinal surgeries
  Laparoscopic gastrectomy
  Laparoscopic left/right half colon resection
  Laparoscopic low anterior resection
  Laparoscopic gastric bypass surgery



Specification   

Code of Endocutter Stapler  

Endocutter Stapler Standard Model 

ZNQ-A

Endocutter Stapler XL Model

ZNQ-C

 

Code of Reloads   

Reload article No.

Color Of Reload

Staple Height (mm)

Cutting Lenghth

ZN-Z-30-2.0

Grey

2.0

30mm

ZN-Z-30-2.5

White

2.5 

30mm

ZN-Z-45-2.0

Grey

2.0

45mm

ZN-Z-45-2.5

White

2.5 

45mm

ZN-Z-45-3.5

Blue

3.5 

45mm

ZN-Z-45-4.0

Gold

4.0 

45mm

ZN-Z-45-4.8

Green

4.8 

45mm

ZN-Z-60-2.5

White

2.5 

60mm

ZN-Z-60-3.5

Blue

3.5 

60mm

ZN-Z-60-4.0

Gold

4.0 

60mm

ZN-Z-60-4.8

Green

4.8 

60mm

ZN-30-2.0

Grey

2.0

30mm

ZN-30-2.5

White

2.5 

30mm

ZN-45-2.0

Grey

2.0

45mm

ZN-45-2.5

White

2.5 

45mm

ZN-45-3.5

Blue

3.5 

45mm

ZN-45-4.0

Gold

4.0 

45mm

ZN-45-4.8

Green

4.8 

45mm

ZN-60-2.5

White

2.5 

60mm

ZN-60-3.5

Blue

3.5 

60mm

ZN-60-4.0

Gold

4.0 

60mm

ZN-60-4.8

Green

4.8

60mm

   

Remark: "ZN-Z" means straight reloads; "ZN" means articulating reloads.